BenchK PS8 Wall Mounting Set - Fischer 10 x 80 Expansion Plugs & Screws (8 pcs)

BenchK PS8 - Fischer expansion plugs and screws for installing wall bars into concrete and brick (8 pcs).

The technical detail.

fischer DUOPOWER expansion pins (8-piece kit, made in Germany) paired with BenchK wall-bar screws. The 8-piece kit covers Series 1 / 2 / 5; the 12-piece kit is sized for Series 7.

The DUOPOWER pin is a two-component design: a gray nylon body that automatically activates the best holding behavior (expanding, folding, or rolling) for your substrate, with red spreader wings that expand the gray body and protect it during install. Molded edge keeps the pin from falling into the hole; serrated sides prevent rotation; the increased anchoring depth makes it suitable for hollow blocks, aerated concrete, and plastered walls.

Compatible substrates: concrete, solid brick, solid silicate brick, aerated concrete, vertically perforated brick, perforated silicate, plasterboard, gypsum board, light-concrete hollow block, hollow-core slab, natural stone, particle board, full gypsum board.

Required screw length = pin length + thickness of mounted element + 1x screw diameter. Wood, chipboard, and hanger-bolt screws all work. Not recommended for walls under 12 cm (4.7") thick.

Every number, on the record.

• Quantity: 8 sets (pin + screw)
• Drill diameter: 10 mm / 25/64"
• Minimum drill depth: 110 mm / 4 21/64"
• Anchor length: 80 mm / 3 5/32"
• Minimum bolt penetration: 88 mm / 3 15/32"
• Screw range (wood / chipboard): 6.0-8.0 mm (15/64"-5/16")
• Compatibility: BenchK Series 1 / 2 / 5 (PS8 install)